Challenger Lifts

Challenger 40200-3DBK : Bolt-On Ali Kit w BlkTurn Plates

Challenger 40200-3DBK, Bolt-on alignment kit with black powder coated turn plates [4P14, 4015 series only] - 3D alignment compatible

Challenger 40200-3DSS : Bolt-On Alignment Kit w/ SS Turnplates

Bolt-on alignment kit with stainless steel turn plates [4P14, 4015, and 4115 series only] - 3D alignment compatible

Challenger 40230-E : Int Air Line Kt Dual Rolling Jack Op

Challenger 40230-E, Internal air line kit for dual rolling jack operation [4P14EFX, 4015E series only]

Challenger 4030-RA : Drive Thru Ramp Assembly fits 30:000 Ib

Challenger 4030-RA, Drive thru ramp assembly - Fits 30,000 lb 4030 series 4-post models

Challenger 4030-RA6 : Drive Thru Ramp Assembly, 6ft Long

Challenger 4030-RA6, Drive thru ramp assembly, 6ft long - Fits 30,000 lb 4030 series 4-post models

Challenger 44AK18 : Internal Air Line Kit

Challenger 44AK18, Internal air line kit for dual rolling jack operation 44018 series only

Challenger 44AK30 : Internal Air Line Kit

Challenger 44AK30, Internal air line kit for dual rolling jack operation 4030/44030 series

Challenger 44AK40 : Internal Air Line Kit

Challenger 44AK40, Internal air line kit for dual rolling jack operation 44040 through 44060 series only

Challenger 44RK18 : Pivoting Ramp Kit : 39" Long

Challenger 44RK18, Pivoting Ramp Kit, 39" Long - for drive-through operation Models 44018, 44018E

Challenger 44RK30 : Pivoting Ramp Kit : 36" Long

Challenger 44RK30, Pivoting Ramp Kit, 36" Long - for drive-through operation 44030 series

Challenger 44RK40 : Fixed Ramp Kit : 96" Long

Challenger 44RK40, Fixed - 96 in. long - for drive-through operation 44040, 44050, 44060 series

Challenger 44RKE18 : Pivoting Ramp Kit : 52" Long

Challenger 44RKE18, Pivoting Ramp Kit, 52" Long - for drive-through operation Model 44018AR

Challenger 44RKE30 : Extended Pivoting Ramp Kit : 72" Long

Challenger 44RKE30, Extended Pivoting Ramp Kit, 72" Long - for drive-through operation 44030 series

Challenger CLHM-CVR-H : Half Covers for Mobile Columns

Challenger CLHM-CVR-H, Half Covers for Mobile Columns (Each)

Challenger CLHM-ELA-90A : End Lift Adapter, Set of 2

Challenger CLHM-ELA-90A, End Lift Adapter, 9,000 lbs. capacity (per column - used to support vehicle from front and rear) (1 pair) *Designed specifically for Humvee lifting.

Challenger CLHM-FLA : Fork Lift Adapter, 15,000 Capacity

Challenger CLHM-FLA, Fork lift adapter, 15,000 capacity - used to raise fork lift 64 in. (Complete set for pair of columns)

Challenger CLHM-FLA-3WA : Wheel Fork Lift Adaptor (Each)

Challenger CLHM-FLA-3WA, 3rd Wheel Fork Lift Adaptor (Each), For use with CLHM-FLA

Challenger CLHM-GS : Glare Shield for Mobile Column Screens

Challenger CLHM-GS, Glare Shield for Mobile Column Screens (Each)

Challenger CLHM-LSA : Small Wheel Adapter, 14" Tires

Challenger CLHM-LSA, Small wheel adapter can accommodate 14 in. tires. (2 pieces per kit) Order 1 per column for older 160F and 180C models.

Challenger CLHM-LS-LK : Light Kit, 2 Lights Per Kit

Challenger CLHM-LS-LK, Light Kit - used to illuminate work areas under the vehicle, 2 lights per kit - 1 light per column uses power from column battery source

Challenger CLHM-RAR-20 : Rear Axle Restraint - 2:000 Lb

Challenger CLHM-RAR-20, Rear Axle Restraint - 2,000 lb For use with multiple rear axle vehicles. (Each)

Challenger CLHM-SP-240 : Wing Plow Adapter for the Clhm

Challenger CLHM-SP-240, Wing plow adapter for the CLHM. Allows wider clearance for lifting vehicles with wing plows or recessed wheels.

Challenger CLHM-TKP-120 : King Pin Adapter, Used Clhm-Cb-32A

Challenger CLHM-TKP-120, King Pin Adapter: To be used with the CLHM-CB-32A cross beam attachment. For lifting unattached, over the road trailers.

Challenger CS10UPDATEPLUS : Cs10 Update Kit Cs0920/Cs1020

Challenger CS10UPDATEPLUS, CS10 Update Kit for CS0920/CS1020 to 6.5" Chrome, Ram, Wiper, Bearing Assembly

Challenger CS9200CK : Completion Kit for Cs9200

Challenger CS9200CK, Completion Kit for CS9200 - Inground lift components, power unit, and hardware box

Challenger CS9200UPDATEKIT : Cs9200 Update Kit

Challenger CS9200UPDATEKIT, CS9200 Update Kit, CS9200 to 6.5" Chrome, Ram, Wiper, Bearing Assembly

Challenger CSPK : Universal Pre-Kit Ev1020, Ev1220, Ev1520

Challenger CSPK, Universal Pre-Kit Ev1020, Ev1220, Ev1520. Tub and frame with one-piece cover plate.

Challenger B2290 : Cab-Off Footpad Kit (Set of 4)

Part # B2290 (Sold in Sets of 4)Designed to safely lift cabs off truck frames with pads that feature a u-channel to cradle the pinch welds.Pad Replacement: # B2290-01

Challenger TFPK : Electric Vehicle Footpad (Set of 4)

Designed to support select electric vehicles, fits most Challenger 2-Post Lifts. (Set of 4)Pad Replacement: # 482365

Challenger 10317 : Reducer Bushing Kit

Challenger 10317, Reducer Bushing Kit for use with 10318 with 15K/18K 2-post lifts (set of 4)

Challenger CLHM-HR-300 : Clutch Jack : Air/Hydraulic Powered

Challenger CLHM-HR-300, Clutch Jack: Air/Hydraulic powered, 300 lbs. capacity, 360 degree rotating head, 80.5 in. maximum lift height

Challenger 10342 : Hanging Tool Holder Oil Drain Pan 10267

Challenger 10342, Hanging Tool Holder Oil Drain Pan 10267

Challenger 10267 : 32 Gal. Capacity : Oil Drain Pan Kit

Challenger 10267, 32 Gal. Capacity, Oil Drain Pan Kit (4P14 series, 4015 series, 44018 series & 44030 series)

Challenger 10500HD : Turning Radius Gauges

Challenger 10500HD, Turning Radius Gauges for 44030AR, 4030 alignment racks, black powder coat

Challenger 10500SS : Turning Radius Gauges

Challenger 10500SS, Turning Radius Gauges for 40 series, 4P14 series, 4115 series, AR4015 series, AR4115 series, and 44018AR alignment racks, stainless steel, works on a bolt-on kit

Challenger 10316 : Organizer Rack : Stack Adapter Extensions

Challenger 10316, Organizer Rack, Stack Adapter Extensions (10315, 10314, 10313, & 10318)

Challenger 10700 : Black Out Pump Kit

Challenger 10700, Black Out Pump Kit

Challenger RJ04-PK : Air/Hydraulic Pump Kit

Challenger RJ04-PK, Air /Hydraulic Pump kit for converting RJ4.5 from hand pump to air or hydraulic operation.

Challenger RJ3.5 : Rolling Jack

Challenger RJ3.5, 3,500 lbs. capacity hand pump rolling jack for free wheel access, for use on CL4P7

Challenger RJ4.5 : Rolling Jack

Challenger's 4,500 lb. capacity hand pump rolling jack allows for free wheel access.

Challenger RJ7.5 : Rolling Bridge Jack

Challenger RJ7.5 Rolling jack - air/hydraulic operation - adjustable width, 7,500 lbs. capacity for 4P14, 4015 and 4115 series lifts. Includes integrated FLR. 

Challenger RJ9A : Air/Hydraulic Operated Rolling Jack

Challenger RJ9A Air/hydraulic operated rolling jack - adjustable width (34 in. - 42 in.), 9,000 lbs. capacity for AR44018AR/44018AR only

Challenger RJ9S : Air/Hydraulic Operated Rolling Jack

Challenger RJ9S Air/hydraulic operated rolling jack - adjustable width (34 in. - 42 in.), 9,000 lbs. capacity for 44018 series

Challenger CLHM-HTCJ-2000 : Transmission Jack : 2,700 Lbs.

Challenger CLHM-HTCJ-2000, Transmission Jack: 2,700 lbs. capacity, 30 in. start height, 72 in. maximum lift height, 360 degree rotating head with fore/aft tilt, 1st stage power: 100% air, 2nd stage...

Challenger B99700 : Tire Tool Manager Work Station

Challenger B99700, Tire Tool Manager Work Station with filter/lubricator/regulator (2-post only)

Challenger 10310 : Air and Electric Workstation

Challenger 10310, Air and Electric Workstation with filter/lubricator/regulator for 4-post lifts

Challenger B10264A : Air/Electric Workstation (2-Post Only)

Challenger B10264A, Air/Electric Workstation (2-Post Only) with filter/lubricator/regulator (2-post only)

Challenger CLHM-9-THR: Gas-Assisted Mobile, As Each

Challenger CLHM-9-THR, Gas-Assisted Mobile High Stand, 18,000 lbs. capacity. 46.75-84 in. adjustable height (Sold as each)

Challenger CLHM-CA-15: Cab Off Adapter, Set of 2

Challenger CLHM-CA-15, Cab Off Adapter, 1,500 lbs. capacity (Set of 2)

Challenger CLHM-CB-32A: Crossbeam Adapter

Challenger CLHM-CB-32A, Crossbeam adapter, 32,000 lbs. capacity - used to lift by frame rails, (1 kit per pair of columns)

Challenger CL4P9CS : Caster Set With Hardware (Set of 4)

Challenger CL4P9CS, Caster Set With Hardware, (set of 4) to make CL4P9 lifts portable

Challenger CL4P9DT-P: Plastic Drip Tray Set, 18" Length

Challenger CL4P9DT-P, Plastic Drip Tray Set, 18" Length sections (set of 4)